Effect Menu - DIGISYNTHETIC K5 Product Use Manual

separately):
Off, or -90dB to 42dB, step 1dB
(8) Linking group A and B microphone
Yes / No
(9) Feedback inhibition of microphone:
off ,5 grads, level 1 to 5

Effect menu

1. To switch the various pages of effect menu by continue press
Key [Effect]. Tips, press Key [
adjust the parameters in front and back pages, if needed.
2. Twist the knob [EDIT] to adjust parameters.
3. Press key [ ] and [ ] to change the cursor's position of same
page, to adjust various parameters.
4. Echo parameters as follows:
(1) Echo volume: Mute, or -30dB to 0dB, step 0.5dB
(2) Phase inverter: 0°/ 180°
(3) Echo mode: mono echo / stereo echo / dual echo
(4) Echo to Reverb: On / Off
(5) Delay time of ECHO 1: 100ms to 600ms, step 5ms
(6) Depth of ECHO 1:
(7) Pre-delay of ECHO 1: 0ms to 200ms, step 1ms
(8) Delay time of ECHO 2: 100ms to 600ms, step 5ms
(9) Depth of ECHO 2:
(10) Pre-delay of ECHO 2: 0ms to 200ms, step 1ms
(11) Echo equalizer (10 bands):
Type: PEQ/ Low-shelf / High-shelf
Frequency: 19.7Hz to 20200Hz
Gain: -15dB to +12dB, step 0.1dB
Bandwidth: 0.011 to 3.595
(12) Low-cut and High-cut filters of Echo:
Frequency of Low-cut filter: 19.7Hz – 1000Hz
Frequency of High-cut filter: 8000Hz - 20200Hz
Roll-off of filters:
Type of filters: Bessel, Butterworth, Linkwitz-Riley
5. Reverb parameters as follows:
(1) Reverb volume: Mute, or -30dB to 0dB, step 0.5dB
(2) Phase inverter: 0°/ 180°
(3) Type of reverb: Off/ Room / Small Hall / Hall / church /
Cathedral/Vocal
(4) Pre-delay of Reverb: 0ms to 250ms, step 10ms
(5) Reverb time: 0.5s to 6s, step 0.1s
(6) Reverb equalizer (10 bands):
Type: PEQ/ Low-shelf / High-shelf
Frequency: 19.7Hz to 20200Hz
Gain: -15dB to +12dB, step 0.1dB
Bandwidth: 0.011 to 3.595
(7) Low-cut and High-cut filters of Reverb:
Frequency of Low-cut filter: 19.7Hz – 1000Hz
Frequency of High-cut filter: 8000Hz - 20200Hz
Roll-off of filters:
Type of filters: Bessel, Butterworth, Linkwitz-Riley
6. Effect parameters as follows:
(1) Effect volume: Mute, or -30dB to +6dB, step 0.5dB
Main output menu
1. To switch the various pages of Main output menu by continue
press Key [Main]. Tips, press Key [
easy to adjust the parameters in front and back pages, if needed.
2. Twist the knob [EDIT] to adjust parameters.
3. Press key [ ] and [ ] to change the cursor's position of same
page, to adjust various parameters.
4. Main output parameters as follows:
(1) The left and right channel of main output volume:
Mute, or -30dB to +6dB, step 0.5dB
(2) Main output equalizer (7 bands, channel L and R can be
adjusted separately):
Type: PEQ/ Low-shelf / High-shelf
Frequency: 19.7Hz to 20200Hz
Gain: -15dB to +12dB, step 0.1dB
Bandwidth: 0.011 to 3.595
(3) Low-cut and High-cut filters of main output (channel L and
R can be adjusted separately):
4
] for back to last page, easy to
0% to 100%, step 1%
0% to 100%, step 1%
12dB, 18dB, 24dB, 36dB
12dB, 18dB, 24dB, 36dB
] for back to last page,
Frequency of Low-cut filter: 19.7Hz – 202Hz
Frequency of High-cut filter: 12100Hz - 20200Hz
Roll-off of filters:
Type of filters: Bessel, Butterworth, Linkwitz-Riley
(4) Volume of main output matrixes (channel L and R can be
adjusted separately):
Volume of music:
Volume of direct sound: Mute, or -30dB to 0dB, step 0.5dB
Volume of echo:
Volume of reverb:
(5) Phase inverter of main output (channel L and R can be
adjusted separately):
0°/ 180°
(6) Delay of main output (channel L and R can be adjusted
separately):
On / Off,
0.0mS to 7mS, step 0.1mS
(7) Compressor of main output (channel L and R can be
adjusted separately):
Off / Hard-knee / Soft-knee type / Soft-knee type / Soft-
Ⅲ
knee type / Soft-knee type
Threshold: -20dBu to 14.3dBu, step 0.5dBu
Ratio: 1:1 to 16:1, step 2:1
(8) Linking channel L and R of main output:
Yes / No
Center output menu
1. To switch the various pages of Center output menu by continue
press Key [Center]. Tips, press Key [
easy to adjust the parameters in front and back pages, if needed.
2. Twist the knob [EDIT] to adjust parameters.
3. Press key [ ] and [ ] to change the cursor's position of
same page, to adjust various parameters.
4. Center output parameters as follows:
(1) Center output volume:
Mute, or -30dB to +6dB, step 0.5dB
(2) Center output equalizer (7 bands):
Type: PEQ/ Low-shelf / High-shelf
Frequency: 19.7Hz to 20200Hz
Gain: -15dB to +12dB, step 0.1dB
Bandwidth: 0.011 to 3.595
(3) Low-cut and High-cut filters of center output:
Frequency of Low-cut filter: 19.7Hz – 303Hz
Frequency of High-cut filter: 2520Hz – 20200Hz
Roll-off of filters:
Type of filters: Bessel, Butterworth, Linkwitz-Riley
(4) Volume of center output matrixes:
Volume of music:
Volume of direct sound: Mute, or -30dB to 0dB, step 0.5dB
Volume of echo:
Volume of reverb:
(5) Phase inverter of center output: 0°/ 180°
(6) Delay of center output:
On / Off,
0.0mS to 21mS, step 0.1mS
(7) Compressor of center output:
Off / Hard-knee / Soft-knee type
Soft-knee type / Soft-knee type
Ⅲ
Threshold: -20dBu to 14.3dBu, step 0.5dBu
Ratio: 1:1 to 16:1, step 2:1
Subwoofer output
1. To switch the various pages of Subwoofer output menu by
continue press Key [Subwoofer]. Tips, press Key [
last page, easy to adjust the parameters in front and back pages, if
needed.
2. Twist the knob [EDIT] to adjust parameters.
3. Press key [ ] and [ ] to change the cursor's position of same
page, to adjust various parameters.
4. Subwoofer output parameters as follows:
(1) Subwoofer output volume:
Mute, -30dB to +10dB, step 0.5dB
(2) Subwoofer output equalizer (5 bands):
Type: PEQ/ Low-shelf / High-shelf
Frequency: 19.7Hz to 20200Hz
12dB, 18dB, 24dB, 36dB
Mute, or -30dB to 0dB, step 0.5dB
Mute, or -30dB to 0dB, step 0.5dB
Mute, or -30dB to 0dB, step 0.5dB
Ⅰ Ⅱ
Ⅳ Ⅴ
/ Soft-knee type
] for back to last page,
12dB, 18dB, 24dB, 36dB
Mute, or -30dB to 0dB, step 0.5dB
Mute, or -30dB to 0dB, step 0.5dB
Mute, or -30dB to 0dB, step 0.5dB
Ⅰ / Soft-knee type Ⅱ
/ Soft-knee type
Ⅳ
menu
] for back to
/
Ⅴ