Advertisement
BEACON SELF - TEST
The Radio Beacon can self-test as needed, maximum once a month.
ACR recommends that you perform a monthly self-test. The self-test
can be done inside or outside a building or
boat..
A self-test is initiated by pressing the self-test button for one (1)
second, until a brief Green LED flashes, and then releasing the
button. You will then see three (3) additional green LED flash
(representing separate successful indicidual testes performed as part
of the self – test) followed by a long green LED flash and a long beep
indicating a successful test. If any of the indicidual tests fail during the
self – test, there will be a red flash and beep associated with each
failed test and there will then be four beeps, a long res LED flash, and
a strobe at the end of the self – test. Self – test will discontinue at that
point and the beacon must be sent in for repair.
Advertisement
