TP-Link TL-WR543G User Manual page 73

4. I want to build a Web Server on the LAN, what should I do?
1) Because the Web Server port 80 will interfere with the Web management port 80 on the
router, you must change the Web management port number to avoid interference.
2) To change the Web management port number: Login to the router, click the "Security"
menu on the left of your browser, and click "Remote Management" submenu. On the
"Remote Management" page, type a port number except 80, such as 88, into the "Web
Management Port" field. Click "Save" and reboot the router.
Note:
If the above configuration takes effect, to configure to the router by typing
(the router's LAN IP address: Web Management Port) in the address field of the Web browser.
3) Login to the router, click the "Forwarding" menu on the left of your browser, and click the
"Virtual Servers" submenu. On the "Virtual Server" page, click Add New, then on the
"Add or Modify a Virtual Server" page, enter "80" into the blank behind the "Service Port",
and your IP address behind the IP Address, assuming 192.168.1.188 for an example,
remember to "Enable" and "Save".
TL-WR543G 54M Wireless AP Client Router User Guide
Figure A-6 DMZ
Figure A-7 Remote Management
Figure A-8 Virtual Servers
- 64 -
http://192.168.1.1:88