Mac Filtering - TP-Link TL-WR543G User Manual

Choose - Choose one AP from list to connect to.
If you click the Connect, the Figure 5-16 will be shown. And the SSID has been configured.
E.g. If you see the page as Figure 5-19 and you want to connect to the TP-LINK- WR543G site,
you can click Connect. The Figure 5-16 will display and the SSID is TP-LINK-WR543G. Shown
in Figure 5-20:

5.6.4 MAC Filtering

The Wireless MAC Filtering for wireless networks are set on this page. Figure 5-21:
The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the
router, which depend on the station's MAC addresses.
MAC Address - The wireless station's MAC address that you want to access.
Status - The status of this entry either Enabled or Disabled.
Privilege - Select the privileges for this entry. You may select one of the following Allow /
Deny / 64-bit / 128-bit / 152-bit.
Description - A simple description of the wireless station.
WEP Key - Specify a unique WEP key (in Hexadecimal format) to access the router.
To set up an entry, follow these instructions:
First, you must decide whether the unspecified wireless stations can access the router or not. If
you desire that the unspecified wireless stations can access the router, please select the radio
button Allow the stations not specified by any enabled entries in the list to access,
otherwise, select the radio button Deny the stations not specified by any enabled entries in
the list to access.
TL-WR543G 54M Wireless AP Client Router User Guide
Figure 5-20 the SSID of Wireless Settings
Figure 5-21 Wireless MAC address Filtering
- 33 -