Domain Filtering - TP-Link TL-WR543G User Manual

to, and then click the Move button to change the entry's order.
Click the Next button to the next page and click the Previous button to return to the previous
page.
For example: If you desire to block E-mail received and sent by the IP Address 192.168.1.7 on
your local network, and to make the PC with IP Address 192.168.1.8 unable to visit the website of
IP Address 202.96.134.12, while other PC(s) have no limit you should specify the following IP
address filtering list:

5.9.3 Domain Filtering

The Domain Filtering page (shown in Figure 5-40) allows you to control access to certain websites
on the Internet by specifying their domains or key words.
Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable
Domain Filtering have been selected on the Firewall page. To Add a Domain filtering entry, click
the Add New... button. The page "Add or Modify a Domain Filtering entry" will appear, shown
in Figure 5-41:
To add or modify a Domain Filtering entry, follow these instructions:
1. Effective Time - Enter a range of time in HHMM format specifying the time for the entry to
take effect. For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03
to 17:05.
2. Domain Name - Type the domain or key word as desired in the field. A blank in the domain
TL-WR543G 54M Wireless AP Client Router User Guide
Figure 5-40 Domain Filtering
Figure 5-41 Add or Modify a Domain Filtering entry
- 46 -