TP-Link TL-WA501G User Manual page 14

54mbps wireless access point

Hide thumbs Also See for TL-WA501G:

Table of Contents

TL-WA501G

If the result displayed is similar to that shown in figure 4-2, it means that your PC has not

connected to the AP. Please check it following these steps:

Is the connection between your PC and the AP correct?

Note: The LED of LAN port on the AP and LED on your PC's adapter should be lit.

Is the TCP/IP configuration for your PC correct?

Note: If the AP's IP address is 192.168.1.1, your PC's IP address must be within the

range of 192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1

54M Wireless Access Point User Guide

Figure 4-2: Failed result of Ping command

- 9 -

Table of Contents

Show Quick Links

Table of Contents