Schoolhouse Leo Mirror Installation Instructions

Leo Mirror
NOTE:
Leave cardboard strip between frame and glass until
installation is complete.
REQUIRED TOOLS:
Phillips Head Screwdriver
/
˝ Drill Bit, Electric Drill (for Masonry Installation only)
3
16
INSTALLATION INSTRUCTIONS
If you have a Round Mirror or are orienting your
1.
Rectangular Mirror vertically, skip to step 2. If you
prefer to hang your mirror horizontally, follow the
directions below.
Remove Mirror Bracket with a Phillips Head
a.
Screwdriver from back of mirror.
INCLUDED HARDWARE:
Wall Bracket (x1)
Mirror Bracket (x1)
/
#8-32 x " Phillips
1
2
Machine Screw (x2)
/ " Anchorless Screw (x3)
1
3
8
Reinstall the Mirror Bracket into the two thread-
b.
ed inserts on the long side of the mirror back
using two #8-32 x
flat washers and a Phillips Head Screwdriver.
schoolhouse.com
1
#8 Flat Washer (x2)
Level (x1)
/
˝ Machine Screws, two #8
1
2