Lan - TP-Link TD-W8900G User Manual

54m wireless adsl2+ router

Table of Contents

5.4.2

LAN

Choose "Advanced Setup" "LAN", and you will see the LAN screen (shown in Figure 5-14)，the

section allows you to configure the Router's LAN ports settings.

IP Address: You can configure the Router's IP Address and Subnet Mask for LAN Interface.

IP Address: Enter the Router's local IP Address, then you can access to the Web-based

Utility via the IP Address, the default value is 192.168.1.1.

Subnet Mask: Enter the Router's Subnet Mask, the default value is 255.255.255.0.

Enable UPnP: If you need the UPnP function, select the check box to enable it.

Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard

Mode or Blocking Mode.

TD-W8900G

54M Wireless ADSL2+ Router User Guide

Figure 5-14

Table of Contents