Table of Contents
Advertisement
Pixel Strip Drive30 QRG
Safety Notes:
Read all the following Safety Notes before working with this product. These
notes include important information about the installation, usage, and maintenance of this
.
product
This icon indicates critical installation, configuration, or operation information.
Failure to comply with this information may render the fixture partially or completely
inoperative, damage third-party equipment, or cause harm to the user.
There are no user-serviceable parts in this product. Any reference to servicing
in this guide applies only to properly certified technicians. Do not open the housing or
attempt any repairs unless you are certified.
This icon indicates useful, although non-critical information.
· DO NOT open this product. It contains no user-serviceable parts.
· CAUTION: This product's housing may be hot when lights are operating.
· Mount this product in a location with adequate ventilation, at least 20 in (50 cm)
from adjacent surfaces.
· DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
· This product is for indoor use only! To prevent risk of fire or shock, do not expose
this product to rain or moisture.
· DO NOT connect this product to a dimmer or rheostat.
· ONLY connect this product to a grounded and protected circuit.
· Always make sure you are connecting this product to the proper voltage, as per
the Technical Specifications in this guide or on the product's specification label.
· Do not operate this product if you see damage on the housing, I/O ports, or
cables. Have the damaged parts replaced by an certified technician at once.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· The maximum ambient temperature is 104 °F (40 °C). Do not operate this product
at a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
Pixel Strip Drive QRG
2
EN
EN
Advertisement
Table of Contents
