Advertisement
Operation Instruction
Changing light lamp
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or
similar qualified person.
Using your appliance
Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in
summer when the ambient temperature is high.
Ensure enough space for convenient opening of the doors and drawers.
Energy saving tips
The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the
compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down
on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere
with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.
Functions and Display
Key A: Set key (Temperature setting button of refrigerator
compartment)
Display Screen:
Display:
-Once initially powered on, the display screen is on full display
for 3s, and then the refrigerator runs according to setting 3.
-Normal operation display
In case of a failure, the corresponding LED blinks.
In case of no failures, it shows the actual temperature setting of
refrigerator.
Note: Above picture is for reference only
13
Advertisement
