Makita Makstar BPB180 Technical Information page 2

R
epair
CAUTION: Remove the band saw blade and battery from the machine for safety
before repair/ maintenance !
[1] NECESSARY REPAIRING TOOLS
Item No. Description
1R005 Retaining Ring R Pliers ST-2
1R139 Drill Chuck Extractor
1R217 Ring 22
1R269 Bearing Extractor
1R282 Round Bar for Arbor 8-50
1R291 Retaining Ring S and R Pliers
[2] LUBRICATION
Apply Makita grease N. No.1 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion.
Position
Parts item
No.
52 Rubber Tire
54 Gear Complete
Spiral Bevel Gear 29
79
85 Helical Gear 45
Slide Plate
20
Fig. 1
Compression Spring 11
Disassembling / Assembling Retaining Ring R-47
Supporting helical gear 45, when removing spiral bevel gear 11
Disassembling tension plate from slide plate
Removing ball bearing 608LLB
Disassembling spiral bevel gear 11 from helical gear 45
Removing retaining ring S-15 from spiral bevel gear 11
Its inside where wheel cover contacts
Its teeth portion for smooth engaging with spur gear 12
Apply grease approx. 15g.
Its teeth portion for smooth engaging with spiral bevel gear 11
Apply grease approx. 10g.
Its teeth portion for smooth engaging with armature's gear
Apply grease approx. 5g.
Whole surface on which tension plate slides.
20
Tension Plate
Rear Wheel Cover
Purpose
Portion to be lubricated
Front Wheel Cover
Armature
Armature's
Gear
85
Spur Gear 12
P 2 / 10
Spiral Bevel Gear 11
79
54
52