Page 1
UFO LIGHTING FIBRE OPTIC & LED LIGHTING SYSTEMS REVISION MICROLED 1000P LIGHT SOURCE USER GUIDE PLEASE READ THIS USER GUIDE BEFORE INSTALLING OPERATING OR PERFORMING MAINTENANCE ON THE LIGHT SOURCE UNIT...
Page 2
INTRODUCTION Thank you for purchasing this UFO light source. The UFO MicroLED range of light sources utilises an RGBW LED array and is suitable for use with either glass or PMMA fibre optic harness. MicroLED light sources require a 100-240V AC power connection to power the PSU or driver.
Power supplies are available to suit UK, European and USA power outlets. The UK model is shown below. Plug the jack plug into the socket in the back of the light source, and the unit is now ready for connection. UFO LIGHTING...
Speed C - Slowest 1 (White Start) Push once Push once Push once 2 (Red Start) Push once Push once Push once At any time the cycle can be stopped on a colour and started again using the upper push button. UFO LIGHTING...
LED driver has failed Replace LED unit Colour cycle cannot be LED driver has failed Replace LED unit stopped Note: please complete relevant troubleshooting procedures before returning the unit to us for further investigation. MICROLED 1000P USER GUIDE...
132mm x 98mm x 67mm / 316g MAINTENANCE MAINTENANCE LOG Date Maintenance Undertaken Note: a record of all maintenance MUST be kept in the table above, indicating what maintenance was undertaken and when. This MUST be dated for warranty purposes. UFO LIGHTING...