Table of Contents
Advertisement
BMMTRS1
ENGLISH
Some tips for measuring capacitance:
normal for high capacitance measuring.
Meter and leads.
Figure 3-3
Measuring Capacitance
3.2.4 Continuity Check
To avoid electrical shock and/or damage to the instrument, disconnect circuit
power and discharge all high-voltage capacitors before testing for Continuity.
To test for continuity (set up the Meter as shown in Figure 3-4):
1. Set the rotary switch to
3. Connect the test leads to the resistance in the circuit being measured.
NOTE: Continuity test is available
to check open/short of the circuit.
range.
11
Advertisement
Table of Contents
