Table of Contents
Advertisement
ENGLISH
Some tips for measuring resistance:
measurement and memory the test probe resistance in mind. This necessary to subtract for the
resistance of the test leads.
measurements.
resistance measuring.
range condition.
3.2.3 Capacitance measurement
To avoid electrical shock and/or damage to the instrument, disconnect circuit
power and discharge all high-voltage capacitors before measuring capacitance.
The Meter's capacitance ranges are 6.000nF, 60.00nF, 600.0nF, 6.000μF, 60.00μF, 600.0μF,
6.000mF, 60.00mF.
To measure capacitance (set up the Meter as shown in Figure 3-3):
1. Set the rotary switch to Ω
2. Press the SELECT key to select capacitance Test
3. Connect the black and red test leads to the COM and
capacitor test lead).
4. Connect the test leads to the capacitor being measured and read the displayed value.
10
Figure 3-2 Measuring Resistance
range.
BMMTRS1
terminals respectively (or you can use
-
Advertisement
Table of Contents
