C - Installation; Installing The Camera; Connecting The Camera - THOMSON 512389 Manual

C - iNSTALLATiON

1 - INSTALLING ThE CAMERA

• Mount the cameras using screws and plugs adapted to the type of support (the screws and plugs
supplied are suitable for solid walls).
• Make sure the camera is properly secured to prevent it from falling.

2 - CONNECTING ThE CAMERA

• Connect the network cable to a modem/router. In most cases, the camera is immediately detected by
the modem/router, which grants it access to the Internet. After a few seconds, the indicator led at the
front of the camera should stay on continuous red, indicating that the Internet connection has been
successfully established. the blue led should come on (flashing or constant).
Note: a wired connection is compulsory when starting up, even if you wish to use a wifi connection later.
8
en
WiFi OutdOOr Mega-pixel Hd ip caMera