Adc Calibration Menu - TCL L28E3500 Service Manual

2.3 ADC calibration menu

Name Default
SOURCE
R GAIN 4096
G GAIN 4096
B GAIN 4096
R OFFSET 0
B OFFSET 0
G OFFSET 0
AUTO ADC DO
ADC
STATUS
MS82MT-AP/LA Chassis Aliment procedure
ADC Calibration menu
Description
Select the source you intend to ADC Calibrate.
Only YPBPR and RGB are available.
Gain of R channel ( cannot be changed after auto calibration)
Gain of G channel ( cannot be changed after auto calibration)
Gain of B channel ( cannot be changed after auto calibration)
Offset of R channel ( cannot be changed after auto calibration)
Offset of B channel ( cannot be changed after auto calibration)
Offset of G channel ( cannot be changed after auto calibration)
Select and execute the item, ADC Calibration starts. It indicates
a successful calibration if prompt "OK" is displayed.
Otherwise, It is a failing calibration ("FAIL" is displayed).
Show the ADC status of YPbPr/RGB Channel. SUCCESS will be
display if YPbPr/RGB Channel has been correctly calibrated.
Otherwise FAIL will be displayed
PRELIMINARY INFORMATION ----- SUBJECT TO CHANGE
ADC Menu
Press the button in remote control to select certain
item and to change the value of ADC data or start
ADC calibration.
Notes:
1. Only YPBPR and RGB source should be calibrated.
Status
OK
OK
OK
OK
OK
OK
OK
OK
OK
5