General safety precautions WARNING! When using electric tools, basic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For safe operations: Keep work area clean.
Have your tool repaired by a qualified person. This electric tool is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original ZENIT TM spare parts. Otherwise this may result in considerable danger to the user. safety precautions on using hot air gun •...
Rated voltage 220-240 V Rated frequency 50-60 Hz Air flow 13-19 m/s Air temperature 300/500 С Standard delivery includes set of nozzles. intenDeD use Removing paint On profiled surface, paint can be removed using an appropriate fitting spatula and brushed off with a soft wire brush. Cable shrinking Heat-shrinkable sleeve is installed on the insulation place and is heated by hot air flow.
Regularly inspect all screws and ensure that they are fully tightened. Should any of the screws be loosened, retighten them immediately. WARNING Repair, modification and check of ZENIT power tools should be performed only in authorized service centers ZENIT. While use or maintenance of power tools follow all safety rules and standards.