Asus TUF Z270 MARK 2 Bios Manual page 31

The following item appears only when the CPU VRM Switching Frequency is set to [Auto].
VRM Spread Spectrum
This item allows you to enhance the system stability.
CPU Power Duty Control
conditions of every phase component.
[T. Probe]
[Extreme]
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Power Phase Control
This item allows you to set the power phase control of the CPU.
[Auto]
[Standard]
[Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU Graphics Load-line Calibration
power voltage. The CPU Graphics working voltage will decrease proportionally
depending on the CPU Graphics loading.
NOT remove the thermal module.
CPU Graphics Current Capability
This item adjusts the total power range for CPU Graphics overclocking. A higher value
setting provides higher power consumption delivery and extends the overclocking
frequency range simultaneously.
power support.
ASUS TUF Z270 MARK 2 BIOS Manual
Select to set the VRM thermal balance mode.
Select to set the VRM current balance mode.
Automatically set the phase control mode.
The phase control will be based on the CPU command.
Set to the full phase mode.
31