Toshiba W-622 Owner's Manual page 27

Confirming the timer programs
PROG .
Press during timer recording mode
The screen for confirming will appear.
Press PROG . again to exit from confirmation
page.
Changing/cancelling the timer
programs
1) If the TIMER indicator is lit , press both TIMER
to turn it off and then turn the VCR on by
pressing VCR POWER.
2) With steps 2 to 9, change the items.
To cancel a program, select the program you
want to cancel in step 4, and press CANCEL.
The line is then cleared.
3) Press both TIMER to return to the timer
standby mode .
Error indication
The "--E--" ( Error ) indicator appears in the VCR
display if you press both TIMER when:
–– a cassette is not loaded.
–– the loaded cassette has no safety tab.
–– timer recording is in progress.
In these cases, a recording can not be made.
To cancel the Timer Recording
By pressing the POWER button on the front
panel of the VCR, it will cancel the timer
recording and go to standby.
If a power failure occurs during
the timer program recording
.
• When a power failure has occurred, the
programmed contents are not affected,
reset the clock.
Overlaps of the programs
P P
M M
If two timer programs overlap, the recording
start time of program 1 has priority over the
recording off time of program2.
Program 1
(Start time)
Program 2
(Start time)
Overlapped portion
(not recorded)
27