Toshiba W-622 Owner's Manual page 12

Connections (continued)
LINE LINE
IN
OUT IN 1
( FROM ANT.)
R
AUDIO
L
RF
OUT
( TO TV)
VIDEO
CH
3 4
Incoming cable
LINE
OUT
Cable box
OUT
IN
Incoming cable
Cable box
Cable box
12
Cable box
OUT
IN
LINE IN
IN 1
(
FROM ANT.)
R
AUDIO
L RF
OUT
(
VIDEO TO TV)
CH
3 4
A/B switch
A
A A
B
B
B
LINE LINE IN
OUT IN 1
(
FROM ANT.)
R
AUDIO
L RF
OUT
(
VIDEO TO TV)
CH
3 4
LINE LINE
IN
OUT IN 1
( FROM ANT.)
R
AUDIO
L
RF
OUT
( TO TV)
VIDEO
CH
3 4
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable
box.
• turn on the cable box and select cable channel 3
or 4 according to the output channel of the VCR.
• to record a channel while watching another,
press TV/VCR on the remote control to turn off
the "VCR" indicator in the VCR display and select
a desired cable channel on the cable box.
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record any channels through the cable box.
You will need to:
• set TV channel 3 or 4 to receive video signals.
(See page 11.)
• set VCR channel to the output channel of the
cable box, and select a desired cable channel
on the cable box.
• while the VCR is turned off or the "VCR"
indicator is not lit in the VCR display, set TV
channel to the output channel of the cable box.
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record an unscrambled channel while watching
another unscrambled channel (only when you
connect a cable-compatible TV).
• A/B switch "A": record and watch an
unscrambled channel which
comes bypassing the cable
box.
• A/B switch "B": record and watch a scrambled
or unscrambled channel coming
through the cable box.
This set-up will enable you to:
– watch or record a channel through the cable
box via the LINE IN 1 (AUDIO/VIDEO) jacks.
You will need to:
• press I.SELECT so that the VCR display
shows "L1".