GPS status
Wi-Fi technology status
Bluetooth technology status
ANT+® sensor status
Battery level
Video
Recording a Video
NOTE: If the battery power becomes very low while re-
cording video, the device automatically stops recording,
saves the video, and safely turns off.
The status LEDs flash rapidly when the battery charge
level is low.
1 Move the recording switch forward to start recording
video.
NOTE: For the best audio quality, do not touch or
VIRB® ULTRA 30
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 11
cover the microphone area, except with an approved
case.
If the device is off, it turns on automatically. The
device starts recording video immediately, and the
red light turns on.
2 Move the recording switch backward to stop record-
ing video.
The video is saved on the memory card as an .mp4
file. The G-Metrix sensor data is saved on the memory
card as a .fit file.
Video Settings
From the main menu, select Video.
NOTE: Not all settings are available for all video modes.
Mode: Sets the video shooting mode
12)
.
NOTE: Additional settings vary based on the selected
mode.
Resolution: Sets the height of the video, in pixels.
Interval: Sets the time interval for time-lapse mode.
PS: Sets the frame rate in frames per second (fps).
EN
(Video Modes, page
11
2016/8/9 上午 10:42:01