Advertisement
Simple wired remote controller
Automatic Cool/Heat
When all indoor units in the identical
refrigerant system are controlled as a
group, the cooling or heating operation
is automatically performed with the
difference between the setup
temperature and the room
temperature.
Dry operation
• Dry function may not be provided
depending on the using indoor unit,
even if Dry ( ) is displayed on the
LCD of the remote controller. (The
same to Cooling operation)
• When the room temperature
approaches the setup temperature,
it automatically repeats to ON/OFF
operations.
• In order not to return humidity to the
room as possible, the mode of
indoor fan changes to LOW when
the operation has stopped.
• The fan speed may not be
adjustable depending on the using
indoor unit or the room temperature.
• The Dry mode may not be available
depending on the using indoor unit
when the outdoor temperature is
59 °F (15 °C) or lower.
7-EN
– 7 –
Owner's Manual
Advertisement
