Loading And Unloading A Video Cassette - Toshiba MV13P2 Owner's Manual

LOADING AND UNLOADING A VIDEO CASSETTE

Use only video cassette tapes marked
LOADING
Push the center of the tape until it is automatically retracted into the TV/VCR.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
2
UNLOADING
1
To unload a video cassette, press EJECT on
the remote control, or press STOP/EJECT on
the TV/VCR twice. The first press will stop the
tape in any mode. The second press will eject the
tape.
STOP/EJECT
EJECT
OR
AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically (See NOTE on page 40).
•
NOTES: Always eject the tape when not in use.
•
The cassette tape can be ejected even if the POWER is "OFF".
5L80101C P20-33
.
2
33
1
Pull the cassette out.
20/4/04, 16:22
33