Toshiba MV13P2 Owner's Manual page 12

Television/vcr combination
Hide thumbs Also See for MV13P2:
Table of Contents

Advertisement

REMOTE CONTROL
BATTERY INSTALLATION
1
Slide the battery compart-
ment cover in the direction
of the arrow.
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery
manufacturer's directions).
EFFECTIVE DISTANCE OF THE REMOTE CONTROL
NOTES:
When there is an obstacle between the TV/VCR and the remote control, the remote control may not
operate.
When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
Remote sensor of the TV/VCR, the remote operation may be unstable.
When using the remote control, press the button at intervals of about 1 second to ensure the correct
mode of operation.
10
5L80101C P10-19
2
Install two "AAA" batteries,
paying attention to the
polarity diagram in the
battery compartment.
15 FEET
10
(CONTINUED)
3
Replace the compartment
cover.
20/4/04, 16:19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents