Tv Operation - Toshiba MV13P2 Owner's Manual

TV OPERATION

To turn on the TV/VCR,
1
press POWER.
Press Direct channel selection (0–9) to select the channel.
4
TV mode direct channel selection
When the TV/CABLE option is in the TV position, all channels can be instantly selected by using two buttons
(for example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE option is in the CABLE position, channels can be selected as follows:
TO SELECT CABLE CHANNELS:
1-9 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002".
10-12 Press "0", then the remaining 2 digits. Example, to select channel 12, press "012".
13-99 Press the 2 digits in order. Example, to select channel 36, press "36".
100-125 Press the 3 digits in order. Example, to select channel 120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
•
NOTES: If a channel with no broadcast is selected, the sound will automatically be muted.
•
If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
18
5L80101C P10-19
Adjust the volume level by
2
pressing VOL + or –.
The volume level will be
indicated on the screen by green
bars. As the volume level increases,
so do the number of bars. If the
volume decreases, the number of
green bars also decreases.
VOL – VOL +
VOLUME
4
18
3 Set the TV/CABLE selection
to the appropriate position
(see page 22).
TV - VHF/UHF Channels
CABLE - Cable TV Channels
22
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
1
2
0 1
20/4/04, 16:20
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
2
CH 012