Table of Contents
Advertisement
ENGLISH
Shortcuts Instructions
You can use shortcuts on the remote control for fast operation.
Turning your Laser Cinema on or off
To turn your Laser Cinema on:
1. Connect the power cord to the back of the Laser Cinema, then plug the power cord into an AC outlet.
2. When the Laser Cinema is powered on, press the [
To turn your Laser Cinema off, press the [
NOTES
• When your Laser Cinema is in standby mode, it is still consuming power. To completely disconnect power, please
remove the plug from the AC outlet.
• If your Laser Cinema does not receive an input signal for several minutes, it automatically goes into standby
mode.
Using the Live Laser Cinema
To view broadcast programs, press the Home button to access the Home screen on your remote, select the Inputs icon
in Home screen and select Channels as the input source.
Channel search guide
When you select Channels as input, if no Laser Cinema channels were saved before, you will be prompted to do a
channel search. You can also go to Menu > Channels to change the channel settings.
Launch Live Laser Cinema
After channel scaning is done for the first time, the screen will display LiveLaser Cinema operating tutorial, including:
how to Load info Bar, how to load the channel list and so on.
[ Up ] Load info bar
[ OK ] Load channel list
] Load onscreen menu
[
] Jump to previous channel
[
Viewing channel information
As you use the [ CH
/
top of the screen.
1
5-2
6
AT05-2
7
Jan 10,Wed. 10:10 PM
The information banner displays the following information:
1. Channel number
2. Lock status
3. Input
4. Program name
5. Show identification
6. Channel name
] button on the remote.
] button on your remote to scroll through channels, an information banner appears on the
11
2
3
4
AT05 1080i
Antenna
10:00 PM
1:00 AM - 4:00 AM AT06 1080i
8
] button on the remote to turn on Laser Cinema.
│DTV │ 1080i SD │ 4:3 │ Not Rated
│CC │1/2 Unknown Stereo MEPG
1:00 AM
9
14
5
10
Advertisement
Table of Contents
