Disassembling Starter Assembly - Yamabiko ECHO SRM-420ES Service Manual

SRM-420ES, SRM-420TES
T410S, B410S
T410TS, B410TS

2-1 Disassembling starter assembly

C
A
D
F
M
K
H
G
J
STARTER SYSTEM
1. Remove stand (A).
B
2. Remove muffl er cover (B) and cylinder cover (C).
3. Remove four bolts (D) and starter assembly (E)
from the unit.
E
4. Pull out starter rope about 30 cm (12 in) and
hold rope reel (F) by hand. Loop excess rope in
rope reel notch (f) as shown.
f
5. Rotate rope reel (F) clockwise to release tension
of rewind spring.
6. Remove tapping screw (G).
7. Remove pawl catcher (H) and power spring (J).
8. Remove rope reel (K) with rewind spring (L)
from starter case (M) slowly to prevent rewind
spring (L) from unwinding.
WARNING
Wear eye protection and take care when
removing rope reel. Rewind spring may un-
wind suddenly and cause personal injury.
L
9 9
DANGER