Setting The Default Option; Setting The Date And Time; Restore Factory Settings - BANTE inststruments TB100 Instruction Manual

6
Setup Menu

Setting the date and time

2.1 Press and hold the
2.2 Press the ► key, the display shows
2.3 Press the Enter key, the
Press the ◄ / ► key to set the year and the Enter key to confirm.
2.4
2.5 Repeat the step 2.4 to set the date and time. When the setting is completed, the meter will return to the measurement mode automatically.

Restore factory settings

The Factory Reset option is used to restore the meter back to default settings. If enabled, all of the calibration data and selected options will be
lost or reset, the meter must be recalibrated.
3.1 Press and hold the
3.2 Press the ◄ key, the display shows
3.3 Press the Enter key, the display shows
3.4 Press the ► key to select
Exit the settings
To exit the setup menu without saving changes, press the Meas key.
Menu item
Page number
key for 3 seconds to enter the setup menu.
/
characters begin flashing.
Year
key for 3 seconds to enter the setup menu.
/ (Reset/Page 8).
/ indicating that do not reset the meter.
, press the Enter key to confirm.
/
(Date/Page 2).
Option
Menu item
Month - Day
Hour - Minute