To Memorize Channels - Toshiba MD20FP3 Owner's Manual

To memorize channels

This TV/DVD is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory, skipping over
unwanted channels. Before selecting channels, they must be programmed into
the TV/DVD's memory. In addition to normal VHF and UHF channels, this TV/
DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an
antenna, set the TV/CABLE selection to the TV position. When shipped from
the factory, this selection is in the CABLE position.
TV/CABLE selection
1
Press MENU in the TV mode, then press
to select option.
SETUP/MENU
VOL – VOL +
2
Press or to select "TV/CABLE".
CH +
CH –
3 Press or to select "TV" or "CABLE".
TV - VHF/UHF channels
CABLE - Cable TV channels
VOL – VOL +
4
Press MENU repeatedly until the menu screen is
cleared.
SETUP/MENU
Cable TV chart
The chart below is typical of many cable system channel
allocations.
5K70201A [E] (P13-23)
or
23
Automatic memory tuning
Press or to select the "AUTO CH MEMORY",
then press .
The TV will begin memorizing all the channels
available in your area.
CH +
VOL +
CH –
To ADD/DELETE channels
1
Press or to select "ADD/DELETE", then
press .
CH +
VOL +
CH –
2
Select the desired channel to be added or
deleted using Direct channel selection (0–9) or
CH +/–.
1 2 3
CH +
4 5 6
7 8 9 CH –
0
3
Press or to select "ADD" or "DELETE",
whichever function you want to perform.
ADD
VOL – VOL +
0-9
20/4/04, 15:59
0–9
MENU
/ / /
CH 001
/ MENU
/ / / /
23