Zooming; Locating Desired Scene - Toshiba MD20FP3 Owner's Manual

Advanced playback
Zooming/Locating desired scene
DVD

Zooming

VCD
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the
frame.
1 Press ZOOM during playback.
The centre part of the image will be
ZOOM/CH RTN
zoomed in.
Each press of ZOOM will change the
ZOOM
(x 2.0).
Notes:
• You can select the Pause, Slow or Search playback in the zoom mode.
• Some discs may not respond to zoom feature.
DVD

Locating desired scene

VCD
CD
Use the title, chapter and time recorded on the disc to locate the desired point to play back.
To check the title, chapter and time, press RECALL.
1 Press JUMP during playback or stop mode.
JUMP
2
Press or to select the "Time", "Title" or
"Chapter".
CH +
CH –
Note:
In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page
5K70201A [E] (P28-32)
1 (x 1.3), 2 (x 1.5) and 3
1
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
31
/ / /
Press to view a different part of the
2
frame.
You may move the frame from the
CH +
center position to UP, DOWN, LEFT or
VOL – VOL +
RIGHT direction.
CH –
3
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view (
ZOOM/CH RTN
3 Press Numbered buttons (0–9) to change the
number.
Jump
1 2 3
4 5 6
7 9
8
0
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
4 Press ENTER. Playback starts.
• When you change the title,
ENTER
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
20/4/04, 16:00
RECALL
0–9
CANCEL
ZOOM
/ / /
ENTER
JUMP
Off).
Time
Title
Chapter 12
/Enter/0 9/Cancel/Jump
!$
.
31