Functions; Operating The Device; Working With The Device; Disconnecting The Device - Weidmuller VTMaster Operating Instructions Manual

Voltage tester
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17

3.5 Functions

Function/equipment
Automatic on/off
Direct current and alternating current meas-
urement up to 690 V with an LED display
Direct current and alternating current
measurement up to 1000 V with an LCD
display
Polarity indicator
Phase testing
Continuity test
Rotating field test
Load key for triggering a residual current
protective circuit or measurement under load
Test probe illumination
Resistance measurement
Frequency measurement
HOLD function

4 Operating the device

4.1 Working with the device

Always hold the device and accessories by
the respective grip areas. Never touch the
test probes during a test.
Make sure that the display elements are
not covered.
Only use the device with the battery com-
partment closed.
Perform a functional check on the device
before every time it is used.
► Before performing any checks, make sure
that the device is in perfect condition. Watch
out, forexample, for damaged measurement
lines, broken housings or leaking batteries.
The voltage tester must no longer be used if one
or more functions fail or its operational capability
cannot be detected.
► In this case, secure the device against unin-
tended use.

4.2 Disconnecting the device

► Hold the device with both hands.
VT Master
► Move the orange part (L1) upwards slightly so
that it disengages from the latch.
VT Combi Pro, VT Digi Pro
The devices are held together by neodymium
magnets.
► Firmly pull the two parts of the device apart.

4.3 Switching on and off

If the device has been transported at ex-
treme temperatures, it should be acclima-
tised to the local temperature for at least
2 hours before switching on.
Switching on
VT Combi Pro:
► Briefly press the test key.
VT Digi Pro
► Briefly press the test key or the function key.
Automatic switch-on
The device switches on automatically during the
following events:
– Continuity is detected (VT Master)
– Phase is detected
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
21

Advertisement

Table of Contents
loading

Related Products for Weidmuller VTMaster

This manual is also suitable for:

VtcombiproVtdigipro

Table of Contents