Profile 010200280 Instruction Manual page 4

Mechanical timer
Art. 010200280
INSTRUCTION MANUAL
1. TECHNICAL INFORMATION
• Working voltage: 230V (50Hz)
• Maximum resistive capacity: 3680W/16A
• Maximum inductive capacity: 920VA/4A
• Day program: periods of 30 minutes.
• Dustproof and splashproof: IP44.
2. IMPORTANT
• Keep away from children.
• This timer is also fit for outdoor use.
• Resistive appliances are appliances that consume
the same current quantity for the whole duration.
E.g. Lights.
• Inductive appliances, on the other hand, consume
much more current at the start than in normal
operation. This includes coffee-makers, boilers,
heating appliances, etc.
If the inductive appliance exceeds the inductive
capacity of the time switch the appliance may not
be connected to it. If it is the switching contact in
the time switch will prematurely fail and this falls
outside the guarantee conditions
3. PROGRAMMING
The switching on and off times are simply programmed by
carefully pulling out the segments on the rotary dial at the
time the connected device must switch off. The device will
start to operate at the times the segments are left inward.
If you want to switch on your device from 17.00 to 22.00
hours, simply leave ALL rotary dials from the numbers 17
until 22 inwards.
Now set the time switch to the correct time:
• Turn the dial to the right until the arrow matches the cur-
• Immediately plug the time switch into the plug socket.
• ATTENTION : Set the switch in programming mode, other-
• Repeat this procedure each time the time switch has
UK
• Insert the plug of the device to be activated in the plug
• If the connected appliance has an "on-off" switch make
• Check that the time switch is set to the correct time.
• Now switch the switch on the top of the time switch to
• The importer accepts no responsibility for damage claims
• The timer must be connected to a mains voltage of 230V,
• The guarantee period for this product amounts to 2 years
• Take any defective appliance together with the original
• Eltra can under no circumstances whatsoever be held
4. SETTING THE TIME
rent time.
wise your settings will not work. If the switch is set on "I",
current is permantly switched on.
been removed from the plug socket.
5. USE
socket part of the time switch and plug the time switch in
the plug socket.
sure this is "on".
the "clock". If this switch is set to "І" the appliance will
continuously work and will not switch off at the set times.
6. WARANTY
with respect to objects or persons that result from incor-
rect use or non-compliance with the safety instructions.
All damage claims in such cases will be declared null and
void.
max. fusing 16A
and commences on the date of purchase. During this
guarantee period Eltra will repair any defects attributable
to material or production faults. ELTRA may choose to
either repair or replace a defective appliance.
receipt back to the shop where the appliance was sold.
Always add a note with a description of the problem.
responsible for damage of whatever nature if the appli-
ance was not correctly installed according to the specified
installation instructions, nor for damage as a result of
unforeseen circumstances such as natural disasters, light-
ening strike, etc. All such resulting costs are consequently
at the expense of the buyer and are not covered by the
guarantee conditions.
7. INFO
The product complies with the applicable European
directives.
The product should not be mixed with general household
waste. Please inform yourself about how electrical and
electronic products in your region are separated and col-
lected.
Eltra nv, Pachtgoedstraat 2, 9140 Temse
www.profile.eu