Advertisement
IMPORTANT SAFETY INSTRUCTIONS
When using your equipment, basic safety precautions should always be followed to reduce risk of
fire, electric shock, and injury to persons, including the following:
Read all of the instructions listed here and/or in the user manual before you operate the device. Give
1.
particular attention to all safety precautions. Retain the instructions for future reference.
2.
This device must be installed and used in strict accordance with the installation manual and/or use and
care guide.
3.
Comply with all warning and caution statements in the instructions.
The thermostat can be powered by two AA batteries or by a connection to a 24VAC power source
4.
(C-wire). Always install the 2 AA batteries so that they will run the Smart Thermostat in case of a power
failure.
5.
Never connect any terminal of the thermostat to 120/220V AC; this may cause serious damage to the
thermostat and even your HVAC system.
6.
Do not install this thermostat at an altitude of over 6500 feet (2000 meters).
This standalone mounted electronic thermostat serves as a temperature control system only in dry, closed
7.
living or office spaces. Do not place it in a bathroom or area of excessive moisture. Do not allow it to get
wet.
8.
This device should not be used in an environment that is below 32°F (0°C) and above 104°F (50°C),
humidity above 80%.
Do not expose the thermostat to voltage fluctuations of more than+/-10%.
9.
Clean the thermostat with a dry, soft cloth. Do not use solvents or aggressive cleaning agents. NEVER use
10.
detergents, gasoline, glass cleaner, furniture polish, paint thinner, or other household solvents to clean
any part of the thermostat.
11.
Never place anything over the air vents of the thermostat.
Never drop any liquid or chemical inside of the thermostat through the air vents.
12.
DO NOT use outdoors.
13.
DO NOT attempt to repair or adjust any electronic or mechanical functions on this thermostat. Doing so
14.
will void your warranty. The inside of the unit contains no user serviceable parts.
NOTE: DO NOT block air vents of the thermostat.
NOTE: Incorrect connection of HVAC wires to thermostat terminals may cause unrecoverable damage to
your HVAC system. Incorrect wiring connection voids all thermostat warranty coverage. Nor is thermostat
seller or manufacturer responsible for any HVAC system damage due to incorrect wiring connection.
P 2
Advertisement
