Care And Maintenance; Troubleshooting - Kobalt A071006 Manual

CARE AND MAINTENANCE

WARNING
In order to avoid personal injury and the risk of fire and electric shock, disconnect the power supply
before adjusting, inspecting, or cleaning the blower.
CLEANING
• Disconnect the power supply.
• Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the
air vents free of obstructions, sawdust, and wood chips. Do not sprays, wash, or immerse the air
vents in water.
• Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners
may cause damage, and may cause a shock hazard.
STORAGE
Store the appliance and extension cord indoors, in a cool dry location, out of reach of children and
animals.

TROUBLESHOOTING

If you still have questions or an unresolved issue after going through this troubleshooting guide, or
just want to speak to a Kobalt product expert, please call our Kobalt customer service department
at 1-888-356-2258.
PROBLEM
The blower will not blow.
The blower doesn't start.
POSSIBLE CAUSE
1. Blocked tube.
1. Unplugged power supply.
2. The switch is defective.
12
CORRECTIVE ACTION
1. Clear the blockage.
1. Plug in power supply.
2. Have the switch replaced by an
authorized service center.