Page 3
Length of power cable: Check whether rotary parts operate freely and not jammed Weight: or damaged. All parts must be installed properly and must comply with GGH 10 INOX conditions so that perfect operation of the device is Connection: 230V~50Hz ensured.
Page 4
Check tightness of all connections. Replacement of gas cylinder If gas leakage remains, call an expert before re- commissioning. Always replace the gas cylinder outside and out Assembly and maintenance of the device must of reach of flames or flammable sources without comply with laws and directives of a country presence of other persons! where the device is used.
Page 5
Identification of the devices: the first aid box. GGH 10 GAS HOT AIR TURBINE If you require medical assistance, GGH 10 INOX GAS HOT AIR TURBINE give the following information: GGH 17 INOX GAS HOT AIR TURBINE Order No.: Place of accident...
Number of injured persons takes place under supervision of an adult trainer in the Type of injury course of education. Training Application according to intended use Use of the device requires corresponding guidance by an Attention! expert or operation manual only. No special training is DO NOT USE FOR HEATING OF RESIDENTIAL required.
Page 7
Burner flame Excessive gas Have the reduction goes off during output valve checked or operation replaced Gas cylinder Replace gas empty cylinder. Insufficient gas Check and clean input motor grid Check fan Place the device Wind or air draught outside wind or air extinguishes draught, let it cool flame.
Need help?
Do you have a question about the GGH 10 and is the answer not in the manual?
Questions and answers