Advertisement
Maintenance
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Disconnect all loads from the inverter before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware
• misalignment or binding of moving parts
• damaged cord/electrical wiring
• cracked or broken parts
• any other condition that may
affect its safe operation
Page 6
For technical questions, please call 1-888-866-5797.
2. Keep this unit clean and dry. Disconnect
the unit before cleaning. Clean only the
outside of this unit with a soft, dry cloth.
Note: This device has no replaceable parts. If
it needs service, take it to a qualified technician.
Item 64867
Advertisement
