Related Manuals for HFT PurgEye Weld Purge Monitors Series
Summary of Contents for HFT PurgEye Weld Purge Monitors Series
- Page 1 ® PurgEye Argweld ® WELD PURGE MONITOR ® © HFT ® USER INSTRUCTIONS PurgEye a ‘Family’ series of Weld Purge Monitors ® ®...
-
Page 2: Table Of Contents
Copyright © HFT . All rights reserved. ® This publication may not be reproduced by any means without the written permission of Huntingdon Fusion Techniques HFT ®. All logos, names, trademarks are the property and ownership of HFT ® E&OE... -
Page 3: Features
FEATURES PAGE 3 Thank you for purchasing this PurgEye 500 Weld Purge Monitor ® ® Your monitor is provided with a UK power lead with a fused plug, the fuse is to protect the lead. We can provide a power lead for your regional requirements. -
Page 4: Front Of The Instrument
FRONT of the INSTRUMENT PAGE 4 The PurgEye 500 has an LCD Display and 4 menu buttons for ® operation of the instrument. © HFT ® LCD Display 4 x Menu Buttons... -
Page 5: The Rear And The Connections
The Rear and the PAGE 5 CONNECTIONS © HFT ® Quick fit ports DC Power 6 pin Mini DIN 8 pin Mini DIN for inlets and outlets Connector PC Connector User Port On the rear of the unit (left to right): One 6 mm OD Pipe connector for gas input. -
Page 6: Understanding The Menus And Starting
UNDERSTANDING PAGE 6 the MENUS and STARTING 1. Connect the supplied 12 volt PSU to the DC socket at rear of unit. 2. Connect the supplied PSU to a mains supply, (100 to 240 V AC) and switch on. 3. Unit should now display “Warming Up”. 4. -
Page 7: Getting Started Continued
Getting PAGE 7 STARTED Continued You can use the alarm levels L1 and L2 with the relay contacts on the user interface to control gas valves and welding equipment. To mute the alarm at the end of warm up, Press any Button to enter main menu, press MORE, then press OK to set WARNING TONE to off. -
Page 8: Settings Menu, Warning And Keypad Tones
SETTINGS MENU PAGE 8 From main menu, press MORE for settings menu. “<< >> EXIT” Press << to scroll backwards through menu options. Press >> to scroll forwards through menu options. Press OK to Select or toggle options. Press EXIT to leave settings menu. -
Page 9: To Set Or Change Pin Code And Language Selection
To SET or CHANGE PIN CODE PAGE 9 Pressing >> will take you to the next setting which is CHANGE PIN CODE. To set or change the PIN, enter 1,2 or 3 to set each of the four digits in turn or press NONE to turn off PIN. -
Page 10: Setting Alarm Limits
SETTING THE ALARM LIMITS PAGE 10 Press any button to enter main menu. Then press L1 or L2 to enter the set limit display. From here if you just press OK, OK, OK then the unit will return to main menu with no change. The default value for L1 is 50 ppm and 100 ppm for L2. -
Page 11: Pump Operation And Technical Specification
PUMP OPERATION PAGE 11 After the warming up period has completed the screen will display: Press the left hand button to enter MAIN MENU. Press the right button to turn the pump on or off. If there are no alarms being displayed then the screen will look like this. -
Page 12: Warning And Sensor Care
WARNING PAGE 12 The measuring sensor in this instrument must not be subjected to pressure. The instrument must not be used directly connected to a gas bottle. A regulator and flow meter should be connected to the gas bottle. The PurgEye 500 Weld Purge Monitor must always be ®... -
Page 13: User Interface, Pin-Outs And Cable Colour Codes
USER INTERFACE PAGE 13 (8-pin Mini DIN Lead) Colour Decription Black L1 - Connected to Pin 6 when oxygen > L1 Set Point White L2 - Common L1 - Connected to Pin 6 when oxygen < L1 Set Point Yellow Status Input (+) Normally High Input - Connect to Pin 7 to activate Maximum Output Current:... -
Page 14: The Family Series Of Weld Purge Monitors
WELD PURGE MONITORS ® Argweld PurgEye Range ® ® Huntingdon Fusion Techniques HFT is the only ® Company to have a complete ‘Family’ Series of Weld Purge Monitors ® Pioneering the way in weld purging technology where real science has been used to create a family range to suit all weld purging, purity levels and budgets. -
Page 15: Our Range Of Inflatable Tube And Pipe Weld Purge Systems
Inflatable ® ® Tube and Pipe Weld Purge Systems simplify the process of inert gas purging and are quick and easy to install. Suitable for © HFT ® tubes and pipes from 1-24”ø (25 - 600mm). Quick Purge Argweld ®... -
Page 16: Accessories For Welding
Water Soluble Weld Purge ® Film™ is supplied as a kit containing film, soluble adhesive, a cutting knife and instructions. Suitable for pipework where a closure weld is being performed. © HFT ® range of Flexible The Argweld ® Welding Enclosures™ have been... -
Page 17: Other Languages
Other PAGE 17 LANGUAGES in Progress Les autres langues sont actuellement dans le progrès. Pour le moment, s’il vous plaît contacter votre Distributeur local Andere Sprachen sind momentan im Gange. Kontaktieren Sie vorläufig, bitte Ihren örtlichen Verteiler Otros idiomas son actualmente en progreso. Para ahora, contacta por favor su Distribuidor local... -
Page 18: Customer Support And Worldwide Care
Veuillez contacter notre partenaire en France et en Afrique (www.sana.fr) ou France Soudage (www.france-soudage.fr) Email: lille@sana.tm.fr +33 (0) 320 183 080 et Email: clemenceretel@huntingdonfusion.com Tel: +33 6 52 84 28 39 HFT France ® Para la información adicional en Español, contacta por favor España: www.codesol.com Email: codesol@codesol.com... -
Page 19: Warranty
All products are thoroughly tested to our Quality Control Procedures prior to leaving our manufacturing facility. Should you encounter a problem with your product, please notify us immediately upon receipt. Huntingdon Fusion Techniques HFT warrants this product to be ® free of defects in workmanship and material, with exceptions stated below. - Page 20 Tel +44 (0) 1554 836 836 Fax +44 (0) 1554 836 837 www.huntingdonfusion.com Email hft@huntingdonfusion.com E&OE Copyright © HFT . All rights reserved. ® This publication may not be reproduced by any means without the written permission of Huntingdon Fusion Techniques HFT ®...
Need help?
Do you have a question about the PurgEye Weld Purge Monitors Series and is the answer not in the manual?
Questions and answers