Function setup (DVD)
Function setup (DVD)
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
Temporary disabling of rating level by DVD disc
DVD
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit
If the DVD disc has been designed to tempo-
2
rarily cancel the Rating level, the screen which
follows the "Reading" screen will change,
depending on which disc is played. If you
select "YES" with the ENTER key, password
input screen will then appear.
3
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press
RETURN.
4
Playback will commence if the entered
password was correct.
70
2I40301A-En_p70-BACK
"%
.
Enter Password
70
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
21/3/06, 9:46 AM
0–9
ENTER
RETURN
PLAY
OPEN/CLOSE