Parental Control Setting; To Change The Parental Level; Temporary Disabling Of Rating Level By Dvd Disc; Setting Setup Language - Toshiba SD-V395 Service Manual

Function setup (DVD)

Parental control setting

Some discs are specified not suitable for children. Such discs can be limited
not to play back with the unit.
Parental control setting
DVD
1 Press SETUP in the stop mode or No Disc.
Press or to select "Parental". Then press
or ENTER.
VCR MENU
SETUP
SET +
CH – CH +
ENTER
SET –
2 Press or to select "Parental", then press
or until the level you require appears.
SET +
CH – CH +
ENTER
SET –
• Level Off: The parental controlsetting does not function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be played
back.
• Select from the level 1 to level 8. The limitation will be
more severe as the level number is lower.
3 Press or to select "Password".
Press number buttons (0-9) to input a 4-digit password.
SET +
CH – CH +
ENTER
SET –
1 2 3
4 5 6
Be sure to remember this number!
7 8 9 0
• If you input a wrong number,
press CANCEL.
60
Function setup (DVD)

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
Temporary disabling of rating level by DVD disc
DVD
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see page 42).
PLAY
OPEN/CLOSE
2 If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the "Reading" screen will change, depending on
which disc is played. If you select "YES" with the
ENTER key, "Your disc exceeds the parental
control level#." screen will then appear.
Reading Your disc exceeds
welcome
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
3 If you wish to cancel the set rating level temporarily,
select "Parental Control Level" with or , then
press ENTER. If the 4-digit password at step 2 on
page 61 has been set, the password entering
screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don't know (or have
forgotten) the password, select "Cancel Picture".
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
SET +
CH – CH +
ENTER
SET –
OPEN/CLOSE
62
0–9
/ / /
SETUP
RETURN
ENTER
CANCEL
4
Press ENTER to store the password.
Note: Now the rating is locked and the
SET + setting cannot be changed unless you
enter the correct password.
CH – CH +
ENTER
SET –
5 Press SETUP or RETURN to remove the paren-
tal control screen.
VCR MENU
SETUP
RETURN
Notes:
• If each setup (pages 57~66) has been completed, the
unit can always be worked under the same
conditions (especially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
OPEN/CLOSE
0–9
PLAY
/
RETURN
ENTER
4
Enter the password with number buttons (0-9).
Then press ENTER.
If you interrupt the entering, press
1 2 3
RETURN.
4 5 6
7 9 0
8
Please enter the
4 digit password -
SET +
CH – CH +
ENTER
Enter/0 9/Cancel/Return
SET –
RETURN
Playback will commence if the entered
5
password was correct.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.

To change the parental level

To change the parental level
DVD
1
Press SETUP in the stop mode or No Disc.
Press or to select "Parental".
Then press or ENTER.
VCR MENU
SETUP
SET +
CH – CH +
ENTER
SET –
2
Press number buttons (0-9) to enter the
password you have stored.
1 2 3
4 5 6
7 8 9 0
3
Press ENTER.
The rating is now unlocked.
SET +
CH – CH +
ENTER
SET –
4 Press or to select "Parental", then press
or to change the parental level.
SET +
CH – CH +
ENTER
SET –

Setting setup language

The setup language can be selected.
DVD
Setting setup language
VCD
CD
1
Press VCR DVD selector to select the DVD mode.
VCR "Reading" changes to "No Disc".
DVD
(If DVD disc has already loaded, the
playback will start automatically.)
Reading
welcome
2
Press SETUP in the stop mode.
Press or to select "Other".
VCR MENU
Language Picture Sound Parental Other
SETUP
SET +
/Enter/Setup/Return
CH – CH +
ENTER
SET –
3
Press or ENTER to select "OSD Language".
SET +
Language Other
Picture Sound Parental
OSD Language English
CH – CH +
ENTER
SET –
/Enter/Setup/Return
0–9
SETUP
RETURN
ENTER
/ / /
5 Press or to select "Password", then press
number buttons (0-9) to enter the password.
SET + Note: You can change the password
if you want.
CH – CH +
ENTER
Language Picture Sound Parental Other
SET –
Password 9 8 7 6
Parental 5
1 2 3
4 5 6
0 9/Cancel
/Enter/Setup/Return
7 8 9 0
6 Press ENTER.
Now the parental level is changed and
SET +
locked.
CH – CH +
ENTER
SET –
7 Press SETUP or RETURN
to remove the parental control screen.
VCR MENU
SETUP
RETURN
Note:
Do not forget the password. If you forget the password, contact
the dealer that you purchased the unit from.
61
VCR DVD
SETUP
RETURN
ENTER
/ / /
4 Press or ENTER and then press or to
select desired language (e.g. English), then
press ENTER.
Language Picture Sound Parental Other
SET +
OSD Language English English
CH – CH + Francais
ENTER
Espanol
SET –
/Enter/Setup/Return
To make SETUP screen disappear, press SETUP
5
or RETURN while the SETUP screen is being
displayed.
VCR MENU
SETUP
RETURN
If the unit does not operate properly: Static electricity,
etc., may affect the player's operation. Disconnect the
AC power cord once, then connect it again.
63