Mts Broadcast Compatibility - Toshiba W-422 Owner's Manual

RECORDING

MTS Broadcast Compatibility

This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to
your stereo system or stereo TV, you will experience the SAP or stereo sound.
Preparation
Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.
VCR TV
POWER
1 2 3
4 6
5
CM SKIP
7 8 9
A.SELECT
0 100
A.SELECT
EJECT
PLAY
REW F F
ENTER
1
STOP
SLOW PAUSE/STILL
REMAIN/ COUNT
DISPLAY
DISPLAY RESET SP/ SLP
COUNTER
REC TIMER
I.SELECT
TV VOL PROG. CANCEL
2
Selecting a sound
Sounds recorded on the tape
According to your setting of "SAP SET" on the SET UP screen, the sound is recorded onto different
tracks of the tape as below. Set "SAP SET" to "ON" or "OFF" appropriately.
Setting of "SAP SET"
Type of receiving
on the SET UP
broadcast
screen
Regular
(monaural audio)
Stereo
Regular+SAP
Stereo+SAP
Sounds in playback
You can play SAP and/or stereo broadcasts with this VCR. Press A.SELECT to select a desired sound.
Desired sound L , R indicators in the On-Screen display
SAP sound R (right) is on.
Stereo sound Both R (right) and L (left) are on.
Note
When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.
Recording the SAP/Stereo Broadcast
1
On the SET UP screen (page 15),
select "SAP SET" using PLAY or
STOP , and set to "ON" using REW
or FF .
2
Press PROG . once to exit.
3
Perform a recording.
SAP (Second Audio Program broadcast):
A separate audio program, usually broadcast in a second language with the
main language.
On-Screen Display
(Press DISPLAY .)
"SAP"
"ON" or "OFF" not lit
"ON" or "OFF" not lit
"ON" lit
"OFF" lit
"ON" lit
"OFF" lit
( For W-528/W-522 only )
Contents of recorded sound
Normal sound
track (Mono)
"STEREO"
not lit MONO
lit MONO (MIXED)
not lit MONO
not lit MONO
lit MONO
lit MONO (MIXED)
Sound output
SAP
HIFI Sound
Hi-Fi sound track
L
R
MONO MONO
STEREO
MONO SAP
MONO MONO
MONO SAP
STEREO
29