Memory Stop Feature - Toshiba W-422 Owner's Manual

VCR TV POWER
1 2 3
4 5 6
CM SKIP
9
7 8
A.SELECT
0 100
ENTER
EJECT
PLAY PLAY
REW F F FF
ENTER
REW
STOP
SLOW PAUSE/STILL STOP
REMAIN/ COUNT
DISPLAY COUNTER RESET SP/ SLP
REC TIMER
I.SELECT
COUNT RESET
TV VOL PROG. CANCEL
PROG.
REMAIN/
COUNTER
DISPLAY
24
Memory Stop Feature (Zero Return)
1
On the SET UP screen, select
"COUNTER MEM." using PLAY or
STOP , and set to "ON" using
REW or FF .
2
Press PROG. to exit.
The memory-stop feature allows you to quickly return to a
counter reading of "0H00M00S" from any point on the tape.
Memory stop is automatically turned on whenever the time
counter with memory is displayed on the TV screen. This is
convenient when you want to watch a segment of the tape
repeatedly. You may also discover other useful application for
this feature.
Notes: If you are rewinding the tape and the VCR stops at
"0H00M00S M", press REW again to continue
rewinding.
If you press the FF (fast-forward) button and the time
counter never reaches "0H00M00S M" between that
point and the end of the tape, the VCR will continue to
fastforward to the end of the tape.
For W-528/W-522 only