Playback; Basic Playback; Double Speed Playback; S-Vhs Quasi Playback (Sqpb) - Toshiba W-422 Owner's Manual

PLAYBACK

Playback
This section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
VCR TV POWER
1 2 3
4 5 6
CM SKIP
9
7 8
A.SELECT
0 100
EJECT
PLAY
REW F F
ENTER
STOP
SLOW PAUSE/STILL
REMAIN/ COUNT
DISPLAY RESET SP/ SLP
COUNTER
REC TIMER
I.SELECT
TV VOL PROG. CANCEL
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.

S-VHS Quasi Playback (SQPB)

• This VCR can also play back at tape which is recorded in S-VHS format.
But the playback pictures does not have the same quality and resolution as the original S-VHS
playback picture.
• This VCR cannot record in S-VHS format.
• SQPB is an abbreviation for S-VHS Quasi Playback.
20

Basic Playback

1
Load a recorded cassette.
Power is turned on.
CH/TRK
If the cassette has no safety tab,
playback starts automatically.
2
Press PLAY to start playback.
2
FF
3
To stop playback, press STOP .
3
REW

Double Speed Playback

1
Press PLAY during playback.
A tape runs at double speed
playback.
To resume normal playback Press PLAY .
Rewinding / Fast-forwarding
Press REW or FF in the stop mode.
TIMER
S L P
VCR REC
VCR
VCR
S
L
ST
L