Physical Description - Toshiba IK-WB30A User Manual

Physical Description

Front Panel
CS Lens Mount Ring
Back Panel
Ethernet 10/100 RJ45 Socket
Recessed Reset Button
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
Pin
1 12V DC Output
2 Digital Output
3 Digital Input
4 Ground
5 Power in 24V AC
6 Power in 24V AC
7 RS-485 +
8 RS-485 -
NOTE
● Only when a power supply connects to a camera, 12V DC is outputted from 1-pin.
● When an AC adapter or PoE is connected, don't supply AC24V from this terminal.
14
Light Sensor
Audio Out
Status LED
Microphone In
Name
SD/SDHC Card Slot
Power Cord Socket
General I/O Terminal Block
External/Internal MIC Switch
1 2 3 4 5 6 7 8
Built-in Microphone
Fixing Hole
When you connect
a wire, or when you
disconnect it, please
p u s h t h i s o r a n g e
push-button.