Related Manuals for Feli NCM-502
Summary of Contents for Feli NCM-502
-
Page 2: Specification
Ⅰ. Product and Specification Introduction Positioning Support NCM-502 Heating Switch Ceramic Heater Thumb Screw ON/OFF Pressure Adjustment Nut Fixing Plate Granite Wheel Support Spring Positioning Hole Motor Natural Granite Wheels Scraper Power Switch Stainless Pot 【Specification】 ●Dimensions：L48.5 cm x W28 cm x H30 cm ●Weight：32 kg... - Page 3 Ⅱ. Assembly Steps 2. Place the granite wheel support inside the pot vertically with the positioning hole facing 1. Place the Stainless pot on the stand. upward. 4. Install the positioning support. (Align one end with the positioning hole and align the 3.
- Page 4 Ⅲ. Operating Instructions 2. Add cocoa paste into the pot. Do not 1. Plug-in the machine and turn on the power. let the cocoa paste exceeds the height of the stone mill. 3. Turn on the machine to start the refining 4.
- Page 5 Push upward rod to turn on heater. Ⅳ. Cleaning Instructions 1. Turn off the power. (Unplug the power cord.) 2. Remove the transparent Lid. 3. Remove the Positioning Support and the Spring. 4. Remove the Granite Wheels. 5. Remove the Stainless Pot. 6.
-
Page 6: Ⅶ. Troubleshooting
If the button pops up, clean the ingredients out of the machine. After pressing the overcurrent safety button, restart the machine. Ⅷ. Contact us Feli Technology Co., Ltd. TEL：886-2-2903-3330 FAX：886-2-2902-6291 E-mail：feligroup@feli.com.tw Website：www.felilook.com...