Setting The Display; Cd Mode; Switching To Cd Mode - Blaupunkt Monterrey MP35 Operating Instructions Manual

RADIO MODE
Starting SCAN
Keep the MENU button 7 pressed
until the scan process starts.
"SCAN" appears briefly in the display
followed by the current frequency (which
flashes).
Stopping SCAN and continuing
listening to a station
Press the MENU button 7.
Scanning is stopped and the station that
was tuned into last will remain active.
Setting the scantime
Press the MENU button 7.
Press the or
edly until "SCAN TIME" appears in
the display.
Set the required scantime using
buttons 6.
the or
When you have finished making your
changes,
press the MENU button 7 twice.
Note:
The set scantime also applies to
scanning in CD/MP3 and CD
changer mode.

Setting the display

You can choose to continuous display
one of the followings:
Band and Time
Band and Frequency
DIS button : pressed
Keep the
until the required display appears.
button 6 repeat-

CD mode

You can use this unit to play standard
CDs, CD-Rs and CD-RWs with a diam-
eter of either 5 or 3 inches.
Beside playing CDs containing audio
data, CDs containing MP3 files can also
be played on this device.
Descriptions of the "MP3 mode" can be
found after this chapter.
To ensure the system functions proper-
ly, only use CDs labelled with the com-
pact disc logo. Problems might be ex-
perienced when trying to play copy-pro-
tected CDs. Blaupunkt cannot guaran-
tee the proper functioning of copy-pro-
tected CDs!
Risk of damage to the CD
drive! Contoured CDs (shape CDs)
are not suitable for playback in this
unit.
We accept no liability for any dam-
age to the CD drive or CD that may
occur as a result of the use of un-
suitable CDs.

Switching to CD mode

If there is no CD inserted in the drive
and the unit is playing Radio, CD
Changer or AUX mode,
button 2.
press the
The release panel opens.
Gently insert CD with the printed
side uppermost into the drive until
you feel some resistance.
The CD is drawn into the drive automat-
ically.
CD MODE
13