Programming The Bodypack Receiver - Prodipe IEM5120 User Manual

Programming the bodypack receiver

Switching on the IEM5120 transmitter:
Hold the POWER button down for 3 seconds until your transmitter comes on.
Do the same to switch off.
Selecting the channel for your system:
Press and hold the "UP" button on the bodypack receiver until the channel blinks.
While the channel is flashing, press "UP" or "DOWN" to select the desired channel. Then press "SET" to
confirm the selection.
Activate the menu lock:
Press the "UP" and "DOWN" buttons simultaneously to lock/unlock the setting.
CAUTION: When using multiple systems, set them to a different channel number for each system.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2019 IPE Music/Prodipe
Page 9