Programming The Transmitter - Prodipe IEM5120 User Manual

Programming the transmitter

Switching on the IEM5120 transmitter:
Hold the POWER button down for 3 seconds until your transmitter comes on.
Do the same to switch off.
Selecting the channel for your system:
Align the bodypack and the transmitter to about ten centimeters. Then, press and hold the "SET" key on
the display. The indicator "1A ----" will flash.
Auto Pairing will be completed when the RF Receive Level indicator appears and the "MUTE" logo
disappears
airing in progress
P
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2019 IPE Music/Prodipe
Page 8