Page 1
UHF personal monitor system Prodipe IEM5120 User guide ____________________________________________________________________________________________________________...
Page 2
Safety Informations Thank you for purchasing this digital appliance. To ensure perfect operation and security, please read the manual carefully and retain it for future reference. This manual can be downloaded from our site. CAUTION Risk of electric shock Do not open! Precautions The lightning flash with the arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage”...
We would like to thank you for buying this product. To gain maximum satisfaction from your Prodipe IEM5120 Personal Monitor Wireless System, please read the instructions in this manual carefully. It is important that you keep the manual in a safe place. Before leaving the factory, every product is meticulously checked by our extremely thorough quality control team.
Functions of the bodypack receiver: 1. Fixed antenna 2. On/off switch/volume knob for the earphones 3. Output Jack (3.5mm) for Prodipe IEM3 earphones 4. Battery indicator light (flashes red when battery power low) 5. LCD screen with information display (channels, etc.) 6.
(see image). Prodipe earphones The Prodipe earphones have been ergonomically designed to ensure that no external noise can interfere with the listening experience for musicians on stage, on the road or in the studio. They offer perfect neutrality and an impeccable balance between lows and highs.
Programming the transmitter Switching on the IEM5120 transmitter: Hold the POWER button down for 3 seconds until your transmitter comes on. Do the same to switch off. Selecting the channel for your system: Align the bodypack and the transmitter to about ten centimeters. Then, press and hold the "SET" key on the display.
Programming the bodypack receiver Switching on the IEM5120 transmitter: Hold the POWER button down for 3 seconds until your transmitter comes on. Do the same to switch off. Selecting the channel for your system: Press and hold the "UP" button on the bodypack receiver until the channel blinks.
Audio connections Connect the audio source (mixing desk, front mix, etc.) to the XLR/Jack inputs on the IEM5120 transmitter. Next adjust the level using the "Left" and 'Right" level's knob at the rear of the device. Connect one end of the mains adaptor to the dc input socket at the rear of the receiver and the other end to a standard power outlet (230V/50Hz).
Sensitivity: 92dB±3 dB Frequency response: 10Hz at 22kHz Cable length: environ 1.2 m Connector type: Ø3.5mm stereo IEM5120 (transmitter and bodypack): Transmission type: UHF UHF frequency range: 630MHz at 680 MHz Number of channels: 100 ...
We recommend that you keep the volume at a reasonable level. Prodipe and its distributors decline all responsibility for any damage caused to the unit in the event that the above precautions are not followed.