Advertisement
IMPORTANT SAFETY INSTRUCTIONS
•
You must check the machine every day. Checking the product can avoid serious accidents. The temperature of
the machine should not be over 300°C.
•
Stop using it if you feel that there are problems in the circuit or machine.
•
Authorised technicians to repair only.
•
Store away from corrosive gas. Do not store outdoors.
For your protection, the Delta Electric Fryers are equipped with a 3-conductor cord set.
The unit is supplied with a molded 3-prong grounding type plug and should be used in combination with a properly
connected grounding-type outlet.
1.
Cut off the power supply before cleaning in case of an accident.
2. Use damp towels with non-corrosive cleanser to clean the module plate; the surface of the equipment and
power cord cannot by washed with water in case of any electrical damage.
3. If it is unused at any time, please turn off temperature controller and main switch.
4. Please store the equipment in a ventilated storehouse away from corrosive gas after cleaning.
Check the machine everyday, before or while in use.
•
Whether the power cord is old, broken or damaged?
•
Whether the control panel is damaged?
•
Make sure to notice any electrical smells.
•
Check indicator lights are working.
•
When in use, make sure the plug, cable, and switch are dry.
•
Fill oil to the the minimum oil level. Do not dry burn.
•
Do not use water to clean the electric box directly or soak the electric box in water to clean.
•
Do not use old oil to fry because it will cause burning and a possible fire.
•
Avoid excessive moisture as this will cause it to splatter and cause burns.
Version 1 – 14/12/2018
WARNING!
CLEANING AND MAINTENANCE
DAILY CHECK
WARNING!
NOTE
2
Advertisement
