Advertisement
Checklists when using the product
Water types
▶
Water types that can be used in the product :
Please use drinking water (bottled water, purified water and groundwater).
* Please use a chlorine remover (sold separately) when using tap water.
Unavailable water :
Movements regarding use
▶
After filling water into the pot, if you push the button, it will work for 3~7min with flickering LED
light and stop automatically.
Intake time
▶
You can have water abundant in hydrogen until at least two hours after the creation.
It is recommended that you press operation button again afterward.
About charging
▶
In case of connecting charger :
If you connect charger, red LED will appear on the operation button (H) and start charging.
Green LED will be turned on after completing charging.
* Be sure to start a car before using car charger (sold separately)
If you do not use the product for a long time
▶
If you do not use the product for a long time (more than one week), keep the inside dry after
●
washing. Take disincentive action before re-using the product.
How to disinfect the inside
▶
F ill hot water (60 ℃~90 ℃) and press the button to create hydrogen with the open lid. If you
●
close the lid, you can get burned due to heat.
Once the hydrogen is generated, discard the water before use.
●
How to clean the outer body
▶
Soak a soft cloth in lukewarm water and wipe the product out.
●
Do not use sulfate, hydrochloric acid or organic solvents (thinner, acetone, etc.) to wipe out the
●
surface of the product or attack stickers. It may damage the surface.
-mini Instructions
H
4
2
Reverse osmosis water, distilled water and water with a lot of heavy metal.
Advertisement
